Exclusions:
It remains the customer's responsibility for freight and packaging charges to and from our service
center. Items used for commercial, contract, or other non-residential purposes, or items damaged due
to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of
hardware is not covered. Proof of purchase (dated register receipt) is required for warranty claims.
Warranty is to the original purchaser and is non-transferable. Any replacement of warranted items will
be in the original style and color, or a similar style and color if the original is unavailable or has been
discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above
exclusions and limitations may not apply. This warranty gives you specific rights, and you may also
have other rights, which vary from state to state.
Care and Maintenance
It is advised that the Canopy should be removed in the winter for best protection and length of use. Our
steel components for garden accessories and furniture are treated with rust inhibiting paint that
protects them from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur
once these protective coatings are scratched. This is a natural process and is not a defect! To
minimize this condition, we recommend care when assembling & handling the product to prevent
scratching the paint. Should any scratching or damage occur, it is strongly recommended that
consumers buy touch up paint prior to the assembly process so that any parts they scratch during
assembly are touched up. Surface rust can also be easily removed with a very light application of
common cooking oil. If surface oxidation (rusting) occurs and if no measure is taken to prevent this, the
oxidation may start dripping on to deck or patio and cause damaging stains, which may be difficult to
remove. This can be prevented if the measure is taken to keep the product from oxidizing. Also the use
of wax candle to lubricate the zippers once a year will keep them running smoothly.
Pre-Assembly
PLANNING ASSEMBLY
To prevent damage, place all parts on a soft surface during assembly.
Remove all protective caps before beginning assembly. It takes about
30 minutes for four persons to complete all the assembly
HARDWARE INCLUDED
Part
Description
QTY.
Image
DD
￠
6*180 Stake
12 PCS
EE
Hook
48 PCS
Содержание L-GZ120PST-2
Страница 5: ...Assembly Instructions ...
