Production Number: XXXXXXXX
Made In China
3 / 3
ASSEMBLY STEPS
Care & Maintenance:
Before using, clean the product completely with a soft dry towel.
When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water; rinse
thoroughly and dry completely. Do not use strong detergent or abrasive cleaners.
Steel components of garden accessories and furniture are treated with rust inhibiting paint. However, due to the
nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched.
To minimize this condition, it is recommended that care be taken when assembling and handling the product, in
order to prevent the paint from being scratched
.
Limited Warranty:
The item is warranted to be free from defects in material or workmanship for a period of twelve
(
12)
months. However, we do not reimburse for transportation or delivery costs, nor compensate the individual or any
outside party for assembling or disassembling the product. This limited warranty is extended to the original purchaser
and applies to defects in materials and workmanship of your item, provided the item is maintained with care and used
only for personal residential purposes.
Exclusions
Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature,
vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of
purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is
non-transferable. Any replacement of warranted items will be in the original style and color or a similar style and color
if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an
implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights, and you
may also have other rights, which vary from state to state.
Step 1
：
Attach leg (B) to connector (C) by hex bolt
(AA), spring washer (BB) and flat washer (CC)
at eight positions with wrench (DD) and do not
tighten.
Step 2
：
Turn the table top over on the soft object and attach leg
(B) to table top (A) by hex bolt (AA), spring washer (BB)
and flat washer (CC) at four positions and do not tighten.
At last, tighten all the bolts with wrench (DD). Turn the
table over again.
