5
Assembly (continued)
1
Attaching the legs to support
frame
2
Attaching the assembly legs
to table top
□ Attach legs (B) to support frame (C) by with bolts (AA),
spring washers (BB), flat washers (CC), don
’t tighten all
bolts in this step.
□ Attach assembly legs (B) to table top (A) by with bolts
(FF), spring washers (BB), flat washers (CC), tighten all
bolts in this step by wrench (DD).
NOTE
:
To avoid destroying the finish, please handle
it with care
3
Finalizing the assembly
□ Turn the assembly table over, then put umbrella cap (D)
on the umbrella hole. Now, your table is ready.
NOTE:
To avoid destroying the finish, please handle
it with care.