Step 3
: Insert Connecting Support Bar 1 (H) into Armrests 1&2 (A&B) & Leg 1&2 (C&D).
Insert Bolt (MM) through Spring Washer (BB), Flat Washer (CC), Armrest 1&2 (A&B) and
Leg 1&2 (C&D). Then use Hex Key (KK) to lock them onto the Connecting Support Bar 1
(H), as shown in Fig 1.
Insert Bolt (AA) through Spring Washer (BB), Flat Washer (CC), Armrest 1&2 (A&B) and
Leg 1&2 (C&D). Then use Hex Key (KK) to lock them onto the Connecting Support Bar 2 (I)
by, as shown in Fig 2.
Do not tighten the hardware.
Step 1
: Insert Bolt (DD) through Spring
Washer (BB), Flat Washer (CC) and Shelf
(G), then lock to Leg 1&2 (C&D) by Hex Key
(KK). Do not tighten them.
Step 2
: Insert Bolt (AA) through Spring
Washer (BB), Flat Washer (CC), and Leg
1&2 (C&D), then lock to Table Top (F) by
Hex Key (KK), as shown below.
Tighten all the hardware.
