Fig.4:
Attach Mosquito pipe O (P) to Beam by Bolt (AA) and Flat washer (BB).
Fig.5:
Attach Side beam connector (J) to Beam by Bolt (CC) and Flat washer (BB).
Fig.6:
Attach Corner Connector (K) to Beam by Bolt (DD) and Flat washer (BB).
AA
M6X15 Bolt
8PCS
BB
M6 Flat washer
16PCS
EE
M6X35 Bolt,
4PCS
FF
M6 Nut
4 PCS
Hardware Pack
Fig.1:
Attach Base cover (C) to Pole (A), and use the Bolt (AA) and Flat Washer (BB) to connect the Base (B) and
Pole (A)
Fig.2:
Connect the Beam F (D) and Beam G (E)by using the Bolt (CC) and Flat washer (BB).
Fig.3:
Attach connected Beam to Pole (A) by using Bolt (CC) and Flat washer (BB), then use the Bolt (CC) and Flat
washer (BB) to fix the Beam and Pole top end tightly.