6
Now, your Gazebo is ready for use.
Fig.14 & Fig.14-1:
Hang Wall (Y) on inside Netting track pole P (Q) with Plastic hanger (II). (Please noted
walls should wrap the support bars (U1) and posts.) Fix the wall ties on the frame corner as Fig.14-1.
Fig.15 & Fig.15-1:
Hang Mosquito net (V) on outside Netting track pole P (Q) with Plastic hanger (II). Fix
the netting ties on the frame corner as Fig.15-1.
Hang the large canopy hooks into the hole on the corners of décor beam.
Fig.16:
Fix the assembled gazebo with Peg (JJ).
Fig.10:
Fix Post base (S) on the end of post (R) with bolt (AA) and flat washer (BB).
Fig.11:
Fix Post connector (R1) on the top of post (R) with bolt (AA) and flat washer (BB).
Fig.11-1:
Lift the whole top, put Décor beam connector (H) on Post connector (R1). Put Connect piece
(U) on décor beam connector (H), fix them with bolt (FF), flat washer (HH) and nut (GG).
Note: 4 people are needed for Fig.11-1.
Fig.12 & Fig.12-1:
Fix the flat end of support bar (U1) on post (R) with bolt (AA) and flat washer (BB) as
Fig.12, fix another end of support bar (U1) on the inside décor beam as Fig.12-1.
Fig.13:
Spread Large canopy (X), hang the hook (pre-assembled on the canopy) into the hole on décor
beam.
(Do not hang the hooks at the four corners.)
Fig.14-1 (look down from roof)
Fig.15-1 (look down from roof )