Cautions:
1. Keep all children and pets away from assembly area. Children and pets should be supervised when
they are in the area of pavilion construction.
2. The area for assembly should not be less than 6 feet from any obstruction such as fence, garage,
house, over hanging branches, laundry line or electrical wires.
3. The unit is heavy. Do not assemble alone. Eight people are recommended for safe assembly.
4. Some parts may contain sharp edges. Wear protective gloves if necessary during assembly.
5. When assembling and using this product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment. Please read all instructions before
assembly and use.
6. For outdoor use only. Install on level ground. Stakes are provided to secure the pavilion in the
ground. If you wish to secure the pavilion to a wood deck or concrete surface, you will need to
purchase fasteners appropriate for these surfaces. These are readily available at your local hardware
store or home center.
7. Check all bolts for tightness before and during usage. Do not cook inside the tent.
8. Please check your state and local regulations prior to purchasing. Some jurisdictions may require
permits for, or otherwise regulate, installation and use.
9. While this pavilion is manufactured to withstand gale force winds utilizing only the supplied ground
stakes, in areas subject to frequent severe weather, securing the pavilion to a deck, concrete patio or
footings should be considered.
10. Your pavilion has been engineered to accommodate winter snow loads incurred in most areas.
Removal of accumulated snow on the pavilion roof with a roof rake is recommended. In areas that are
regularly subject to blizzard conditions however, removal of the roof panel is suggested. The
assembled roof structure can simply be left intact until warmer conditions return
Assembly Instructions:
Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to finish.
Inside this carton you will find enclosed hardware and parts listed above. Please check the contents
of this package to ensure you have received all of the required parts, and that there is no breakage.
All you will need is a screwdriver
, a hammer and two ladders of at least 8 feet (2.5 m) high (not
included).
Parts identification: For ease of identification, all parts are labeled to correspond to the Step number in
which the part is used.
