WARNING:
1. Keep all children and pets away from assembly area. Children and pets should be
supervised when they are in the assembly area of the arbor.
2. Some parts may contain sharp edges. Wear protective gloves.
3. When assembling and using this product, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment. Please read all
instructions before assembly and usage.
4. For outdoor use only. Install on level ground securely.
5. Check all bolts for tightness before and during usage.
Step 5: Connect the bottom of Seat Back
(E) and Screen (G) by Bolt M6*32 (AA) and
flat washer(EE) as Fig.5 shown.
Step 6. Connect the upper of Seat Back(E)
and Screen(G) through L shape connector
(D)by Bolt M6*32(AA) flat washer(EE),Bolt
M6 (BB) and plastic cap(FF) as Fig.6
shown.
Step 7. Connect Arch top beam 2 (A) and
Arch top beam 1 (C) to Screen(G) with Bolt
M6*32(AA), Bolt M6(BB), flat washer(EE)
and plastic cap(FF) as Fig.7 shown.
All bolts can be tighten up by Alley Key M6
and Wrench M6(CC/DD).
