Sunjoy berkley jensen 185650, Руководство по сборке

Страница: 8 / 15

Fig.5 Fasten the assembled
short beam to the post using
bolt (AA),screw (OO) and
washer
s
(NN), then tighten
them with nut
s
(LL).
Fig.6: Fasten the assembled long
beam to the post using bolt
(AA), screw (OO) and washer
s
(NN), then tighten them with
nut
s
(LL).
Fig.8: Fasten the arc support
(10,11) to short beam
(06,07) using screws
(HH) and washers (MM).
F ig.7:
Fix the slanting bar
connector (F2) to the post (08)
using screws (EE).
Fig.3-2:
Fasten the assembled long beams using screws (CC),please aming the indicatrix when assembing .
Fig.4 Pease aiming the middle beam
connector (G2) with the indicatrix on
the beam (05) before
assembling ,
then using drill (RR) to make a pilot
hole in the beam.Fasten the middle
beam connector (G2) to the middle
beam using screws(EE).
Fig.9: Fix the bottom of arc
support (10,11) to the post
using screw
s
(II) and washer
s
(MM).
Fig.10: Measure the distance from the inside of the
post to post using band tape to ensure L1 equals
to L2. Then measure the angle between post and
ground to be 90
°
.
HH