Assembly Step
：
CARE & MAINTENANCE
Before using, clean the table completely with a soft dry towel. When not in use, wipe free of
any dirt or loose objects, wash with a mild solution of soap and water; rinse thoroughly and dry
completely. Do not use strong detergent or abrasive cleaners. Over time nuts and bolts can
loosen. Occasionally, check nuts and bolts, re-tighten if necessary.
CUSTOMER SERVICE
Sunjoy Group warrants to the original purchaser that this item is free from defects in workmanship and materials of
your item provided the item was factory-sealed at the time of purchase and is maintained with care and used only for
personal, residential purposes. The item is warranted to be free from defects in material or workmanship for a period of
6 months. Should any manufacturing defect arise within this warranty period, Sunjoy Group will repair or replace (at
our option) any defective merchandise upon proof of purchase; however, transportation and delivery costs, as well as
labor and material charges to remove or replace parts, remain the responsibility of the purchaser. A purchaser of an
"open box," previously-returned, or "clearance" item, as well as original purchasers outside of the warranty period,
may obtain replacement parts from Sunjoy Group for products in current production, at nominal cost.
If you are within the return policy that most stores have, you do have the option of returning this item back to the store
which you bought it from for an exchange of the same item, or a refund of the purchase.
If you are within or beyond the return policy that most stores have, and need tech. assistance or replacement parts,
please call Sunjoy Group at 1(866) 578-6569 from 8:00 am EST to 8:00 pm PST or e-mail to
[email protected] or visit
to place your order or fax your parts replacement order
form together with the purchase receipt to 1 (740) 283-3549 for assistance.
Step1
：
Attach leg (B) to connector (C) by hex bolt (AA),
spring washer (BB) and flat washer (CC) at eight
positions with wrench (DD) and do not tighten.
Step 2
:
Turn the table top over on the soft object and
attach leg (B) to table top (A) by hex bolt
(AA)
，
spring washer (BB) and flat washer
(CC) at four positions and do not tighten. At
last, tighten all the bolts with wrench (DD).
Turn the table over again.
