Sunjoy AMBERCOVE A306007400, Инструкция по эксплуатации

Страница: 6 / 34


Constructed and marked in accordance with the
Specifications for
Propane
cylinders of the
U.S. Department of Transportation(DOT); or the Standard for Cylinder, Spheres and Tubes for
Transportation of Dangerous Goods and Commission
, CSA B339, as applicable.

Provided with a listed overfilling prevention device.

Provided with a cylinder connection device compatible with the connection for the appliance.

Do not store a spare Propane cylinder under or near this appliance.

Never fill the cylinder beyond 80 percent full.

For appliances designed to use a CGA No.791 Connection: Place the dust cap on the cylinder
valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder
valve that is provided with the cylinder valve. Other types of capes or plugs may result in leakage
of propane.

Use only 9 kg / 20lb Propane tank with size of 46cm (Height) / 18.1in * 32cm (Width) / 12.5in.

Certain items or material, when stored under the heater or nearby, will be subjected to radiant
heat and could be seriously damaged.

Always place heater on a firm and level surface.

Always keep at least 101.6 cm / 40 in side clearance and 101.6 cm / 40 in to top from any combustible
materials.

Always keeps at least 100cm / 39.3in clearance around air opening into the combustion chamber.

Do not use if the wind velocity is greater than 16 km / hr or 10 miles / hr.

Do not use if the environment temperature is below 4.4°C / 40°F.

Do not spray aerosols near the heater while in use.

Do not move the heater while in use.

Any guard or other protective device removed while servicing the heater must be replaced prior
to operating the heater.

Clothing or other flammable materials should not be hung from the heater, or placed on or near
the heater.

Children and adults should be alerted to the hazards of high surface temperatures and
stay away to avoid burns or clothing ignition.

Young children and pets should be carefully supervised when they are in area of heater.

Do not alter or modify the heater in any manner.

Conduct leak test only with soapy water whenever a cylinder is connected, looking for bubbles.

Turn the control knob to “OFF” position when heater is not in use.

Allow 45 minutes to cool down after use before attempting to move your heater.

Gas supply must be turned off at the supply tank while not in use, disconnect the gas supply tank
by unscrewing counter-clockwise the connecter of the regulator.

Installation and repair should be done by a qualified service person. The heater should be
inspected before use and at least annually by a qualified service person.
More frequent cleaning may be required as necessary. It is imperative that the control
compartment, burners and circulating air passageways of the heater be kept clean.

Tank supply system must be arranged for vapor withdrawal. The tank used must include a collar
to protect the cylinder valve.

The pressure regulator and hose assembly provided with the appliance must be used. Replace
only with the pressure regulator and hose assembly supplied by manufacturer.

The minimum permissible gas supply pressure for purpose of input adjustment is 25 PSI.

The installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage
and Handling Code, B149.2.
Every part of the heater shall be secure against displacement and shall be constructed to maintain a fixed
relationship between essential parts under normal and reasonable conditions of handling and usage. Parts not
permanently secured shall be designed so they cannot be incorrectly assembled and cannot be improperly
located or misaligned in removing or replacing during cleaning or other servicing.

6
of
3 4
Country of Origin: China
Pais d’origine: Chine