8
/
9
Country of Origin: China
Fig.15:
Put mosquito netting (T)
and curtain (U) onto long
mosquito netting rod (N) and short
mosquito netting rod (O) by plastic
ring (GG).
Fig.16:
Lift up
base
cover
(P),s
ecure
the
whole
gazebo
to the lawn by stake (HH).
Fig.17:
Remove battery holder cover,
insert two
（
AA
）
battery
，
(
Note:
to
purchase
“AA”
battery
)then
place
cover
on
battery
holder
。
Press
the
switch
to
control
the
light
on
and
off.
Fig.1
8
: Bluetooth audio use: turn on the power switch of Bluetooth audio(arrow pointing to the
location, there will be a tone after opening), the power is turned on, then open the blue tooth
device with Bluetooth function to match and use Bluetooth audio. Turn off the switch of
Bluetooth audio after using the Bluetooth audio.
Bluetooth audio charging: When the power of the Bluetooth audio (A-3) is too low, remove the
four screws, take out the Bluetooth audio (A-3), connect the charger (V) to the power supply,
and the other end Insert into the charging hole of the Bluetooth (A-3) for charging. After the
charging is completed, put the Bluetooth (A-3) back on the post and lock it with the screw.
Replacement of LED light and the light panel cover
Fig.1
9
: If the LED light or panel cover is old or damaged and need to be replaced, pry off the
panel cover (A-2) along the gap between the panel and post with a thin film or simial tool, then
replace the LED light (A-1) and put the panel cover on.
