Fig2-1.
Screw the hook (J) to the top center connector (E).
;
Fig2-2.
Insert the small top support bar (F) to the top center connector (E). Please note the parts label
under the top center connector (E).
Please noted the direction of the top center connector (E), the parts label “H2” face the long Cross beam
(C1), and label “H1” face the short crossbeam (C2).
Fig.2-3.
Insert one end of corner support bar (G1 & G2) into the small top support bar (F) in order.
Fig2-4.
Insert another end of corner support bar (G1 & G2) into the large panel (A).
Fig2-5.
Insert one end of long middle beam (H1) into the top center connector (E).
Fig2-6.
Connect another end of long middle beam (H1) to the short crossbeam (C2) by using bolt (BB)
and washer (CC).
Fig2-7.
Insert one end of short middle beam (H2) into the top center connector (E). Connect another
end of short middle beam (H2) to the long crossbeam (C1) by using bolt (BB) and washer (CC).