Fig.1:
Secure the fence (I5) to the panel (I1, I2, I3, I4) by using bolt (AA) and flat washer (BB).
Fig.2:
Connect big panel 1 (I1) and small panel 1 (I3) by using bolt (EE) and flat washer (BB), repeat this for big
panel 2 (I2) and small panel 2 (I4).
Fig.3:
Insert the crossbeam K2 (K3) to K1 (K4), connect the crossbeam upper connector (J2), crossbeam
K1,K2 (K3,K4) and crossbeam lower connector (J3) by using bolt (CC), washer (BB) and nut (DD).
Fig.4:
Attach the long crossbeam 1 (K3) and the short crossbeam 1 (K1) to the big panel 1 (I1) and the small
panel 1 (I3) by using bolt (FF), flat washers (BB) and bolt (AA), flat washer (BB). Connect the crossbeam (K2,
K4) to the panel (I4, I2) in same way.
Fig.5:
Secure the corner connector (J1) to the crossbeam K1,K3 (K4,K2) by using bolt (AA) and flat washer
(BB).
ASSEMBLY INSTRUCTIONS: