Fig.13:
Insert middle PC top (K5) into top bar (J1), then insert slot 3 (H3) into top bar (J1). Finally, insert middle
PC top (K5) into top bar (J1) and slot 3 (H3). Make sure they are completely inserted in the roof bar’s track.
Fig.14:
Insert upside left PC top (K1)/ Upside right PC top (K2) into top bar (J1) and top slanting bar (J2), then
insert slot 1(H1) / Slot 2 (H2) into top bar (J1) and top slanting bar (J2), finally, insert Bottom left PC top (K3)/
Bottom right PC top (K4) into top bar (J1), top slanting bar (J2) and slot 1(H1)/ Slot 2 (H2). Notice: Please adjust
the PC panel position to align all panels.
Fig.15:
Insert
F shape panel (G1, G2, G3) into Top Bar (J1), Top Slanting Bar (J2) and the outside PC top (K3,
K4, K5).
Fig.16:
Attach
cover 2 (M2) to top bar (J1) by bolt (CC) and washer (BB).
Fig.16-1:
Attach
cover 1 (M1) to top slanting bar (J2) by bolt (CC) and washer (BB).
EE Plastic
ring 52PCS
FF
Φ
8*180mm Stake
12 PCS
Hardware Pack 3
