Fig.4:
Insert the assembled
curve beam (C&D) to the
posts (L1&L2), and connect
them using bolts (AA) and
washers (BB).
Fig.5:
Tighten the assembled
curve beams (C&D) with the
posts (L1&L2) again using
bolts (AA) and washers (BB).
Fig.6:
Insert the cross beam 1 (F) and the
cross beam 2 (G) into the cross beam
connector (H), and secure them together
using bolts (AA) and washers (BB).
Fig.7:
Connect the assembled
cross beams (F&G) with the
curve beams (C&D) and post 1
(L1) and post 2 (L2) using bolts
(AA) and washers (BB).
Fig.8:
Attach the curve
support (J&I) to the cross
beams (F&G) and post 1
(L1) and post 2 (L2) using
bolts (AA) and washers
(BB).
Fig.9:
Connect the top beam 1 (A) with
top beam 2 (B) using bolts (AA) and
washers (BB).
Fig.10:
Attach the assembled top beams (A&B) to the curve beams (C&D) using
bolts (CC) and washers (BB).