Fig.6:
Insert the tilted top bar connector F1 (F2) into the top screen corner.
Fig.7
、
Fig.7-1:
The pothook is fixed (L), insert four tilted top bar (F) into big top connector (J). Then insert the
tilted top bar (F) into tilted top bar connector F1 (F2). At last, insert the long side top bar (G), short side top bar
(H) into the big top connector (J)
Fig.8
: Use Bolt(EE), Washer(BB) and Nut (FF) to connect long side top bar(G), short side top bar(H) with short
bar (E) and long bar (E1).
Fig.9:
Insert small top bar (I) into small top bar connector (K) to form a small top frame
Fig.10:
Put big canopy (Q) on the big top, but do not fully spread. Use Bolt (EE) to fix small canopy on the tilted
top bar (F) and then use Washer (BB) and Nut (FF) to fasten tightly.
GG
Φ8*180MM (Round nail)
TBZ10608180HQ
16 PCS
HH
Plastic ring
44 PCS
Hardware Pack 4
