9
Assembling the Spool
NOTE:
A dual-line factory wound spool (Model TRJ601ERS) is
available for easy spool replacement on the TRJ601E electric
grass t edger. Visit www.snowjoe.com to purchase.
When using the factory wound spool, keep the protective white
cover encasing the line in place, then follow the directions
below to feed the line into the grass t edger.
1. Insert the spring into the shroud and thread the line into
the hole as shown in Fig. 15.
2.
Place the spool cover on the spool and press it firmly
down until the locking devices of the spool cover securely
click into place (Fig. 16).
Check Length of Nylon Cutting Line
1. Pull the line to the inner edge of the outer safety guard. If
the line is too short (i.e. less than 50 mm from the inside
edge of the safety guard), push down on the center of the
t edger head and simultaneously pull the line a
few centimeters past the edge of the safety guard
(Fig. 17).
To Increase Line Length
NOTE: The grass t edger comes with a full line spool.
The line wears down during work. To feed in new line:
1. Switch the machine on and press the head of the spool
firmly against the ground.
2. The line will automatically be released by centrifugal force.
The trimmer line will be cut to the right length by the blade
on the spool cover.
Operation
The electric grass t edger is designed to cut grass
and weeds under bushes, and on slopes and edges that
cannot be reached with the lawn mower. The t edger
must be used outdoors only, at an ambient temperature
between 0ºC and 45ºC.
m
WARNING!
Remove stones, loose pieces of wood
and other objects from the cutting area. The trimmer line
continues to rotate for a few seconds after the t edger
is switched off. Let the motor come to a complete stop before
switching the t edger back on. Do not rapidly switch
the t edger off and on.
ON + OFF Switch
1. To switch the grass t edger ON, press and hold
the safety button, then squeeze the ON/OFF trigger and
release the safety button.
2.
To switch OFF, release the ON/OFF trigger.
Fig. 15
Spring
Fig. 16
Locking
devices
Spool
Spool cover
Fig. 17
Spool
Outer guard
Center of trimmer head
