sunjoe SWJ805E-RM Скачать руководство пользователя

Страница: 8 / 24

Unpacking

Carton Contents

•  Electric chain saw
•  Telescoping pole
•  8 in. (20.3 cm) guide bar (pre-assembled on chainsaw)

080SDEA041
• 8 in. (20.3 cm) cutting chain (pre-assembled on bar)

91P033X
• M8

hex key wrench/bar screwdriver

• M5

hex key wrench/blade screwdriver

• Cutting bar sheath
• Manual with registration card

1. Carefully remove the electric pole + chain saw and check

to see that all of the above items are supplied.

2. Inspect the product carefully to make sure no breakage or

damage occurred during shipping. If you find damaged or

missing parts, DO NOT return the unit to the store. Please

call the Snow Joe

+ Sun Joe

customer service center at

1-866-SNOWJOE (1-866-766-9563

NOTE: Do not discard the shipping carton and packaging

material until you are ready to use your new electric pole +

chain saw. The packaging is made of recyclable materials.

Properly dispose of these materials in accordance with

local regulations.

IMPORTANT! The equipment and packaging material are

not toys. Do not let children play with plastic bags, foils,

or small parts. These items can be swallowed and pose a

suffocation risk!

Assembly

WARNING!

Always wear heavy-duty gloves when

handling the bar and chain. Mount the bar and chain very

carefully so as not to impair the safety and efficiency of the

machine. If in doubt, contact an authorized Snow Joe

Sun Joe

dealer or call the Snow Joe

+ Sun Joe

customer

service center at 1-866-SNOWJOE (1-866-766-9563).

WARNING!

Unpacking and assembly should be

completed on a flat and stable surface, with adequate space

for moving the machine and its packaging.

DANGER!

Never start the motor before installing the

guide bar, chain, and chain cover. Without all these parts in

place, the clutch can fly off or explode, exposing the user to

potentially serious injuries.

WARNING!

To avoid serious personal injury, read and

understand all safety instructions provided.

WARNING!

Before performing any maintenance, make

sure the tool is unplugged from the power supply. Failure to

heed this warning could result in serious personal injury.

Installing/Replacing the

Guide Bar and Chain

Tools and supplies required:

• M8

hex key wrench/bar screwdriver (supplied)

• M5

hex key wrench/blade screwdriver (supplied)

• Heavy-duty work gloves

NOTE: When replacing the guide bar and chain, use only

identical replacement parts. Make sure the electric pole +

chain saw is disconnected from the power supply before

proceeding with installation.

1. Using the supplied M8 hex key wrench, unscrew the end

cover nut and remove the chain/sprocket end cover

(Figs. 1 & 2).

Fig. 1

End cover nut

M8 hex key wrench

Fig. 2

Chain/sprocket end

cover

Содержание SWJ805E-RM

























Результаты поиска

Содержание SWJ805E-RM

Отзывы:

Похожие инструкции для SWJ805E-RM

Бренды по названию

Популярные бренды

sunjoe SWJ805E-RM, Руководство оператора

Результаты поиска

Содержание SWJ805E-RM

Отзывы:

Похожие инструкции для SWJ805E-RM

Бренды по названию

Популярные бренды