sunjoe SWJ802E Скачать руководство пользователя

Страница: 4 / 20

Safety Symbols

The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all

instructions on the machine before attempting to assemble and operate.

READ THE OPERATOR'S

MANUAL(S) – Read,

understand and follow all

instructions in the user

manual(s) before attempting to

assemble and operate.

SAFETY ALERT –

Indicates

a precaution, a warning or

a danger.

Wear personal protective

equipment, including

close-fitting clothing.

The rotating part will

continuously run for several

seconds after you turn off the

machine.

Double Insulation.

WARNING! Do not expose the

unit to rain or wet conditions.

CAUTION! Avoid contacting

the guide bar tip with any

object. Tip contact may

cause the guide bar to

move suddenly upward and

backwards, which may cause

serious injury to the user.

WEAR EYE AND HEARING

PROTECTION – For protection

against injury, wear ear defenders

and safety goggles.

WARNING! SHOCK HAZARD –

Keep at least 50 ft (15 m)

away from power lines.

Do not overreach. Keep

proper footing and

balance at all times.

Keep bystanders and children

a safe distance away.

SWITCH OFF!

Remove plug

from outlet immediately if the

cord is damaged or cut.

Symbols

Descriptions

DANGER! ROTATING

BLADES – Keep hands and

feet away from openings while

the saw is running.

SWITCH OFF!

Remove plug

from outlet before cleaning

or conducting maintenance

checks.

Wear protective gloves and

non-slip footwear when using

the machine and handling

debris.

50 ft

(15 m)

Содержание SWJ802E





















Результаты поиска

Содержание SWJ802E

Отзывы:

Похожие инструкции для SWJ802E

Бренды по названию

Популярные бренды

sunjoe SWJ802E, Руководство оператора

Результаты поиска

Содержание SWJ802E

Отзывы:

Похожие инструкции для SWJ802E

Бренды по названию

Популярные бренды