background image

Specific Safety Rules for 

Wet/Dry Vacuum

This motor-operated wet/dry vacuum is intended for 

vacuuming wet or dry material and dust. This equipment is 

not suitable for vacuuming ashes, coals, toxic, flammable or 

other hazardous materials. Vacuuming of glowing materials 

and dusts that are combustible, explosive or hazardous to 

one’s health is prohibited. The manufacturer will not be held 

responsible for injuries resulting from incorrect use of the 

device or from use that does not comply with the directions.
NOTE: This wet/dry vacuum is intended for indoor household 

use only.

m

WARNING!

 

To reduce the risk of electric shock, do 

not use outdoors or in damp or wet environments. Do not 

expose to rain. Store indoors in a dry place.

m

WARNING! 

For your own safety, read and 

understand the operator’s manual. Do not run the unit 

unattended. Do not pick up hot ashes, coals, toxic 

substances, flammable materials or other hazardous 

debris. Do not use the device in an area with explosive 

liquids or vapors.

m

CAUTION! 

To reduce the risk of injury, unplug the unit 

before servicing.

•  Do not use the wet/dry vacuum without filters in place.
• 

When vacuuming, do not place the equipment on heat 

sensitive floors. For safety reasons, use a fireproof base 

when necessary.

• 

Empty and clean the vacuum before and after vacuuming 

to avoid the accumulation of debris. 

m

CAUTION! 

Do not vacuum hazardous substances 

(e.g. petrol, solvents, acids or lyes) and ash from unauthorized 

fuels (i.e. from oil-burning ovens or heating boilers). These 

substances pose a serious risk of injury.

•  Do not use the vacuum in areas where flammable or 

combustible liquids, such as gasoline, may be present. 

•  Do not vacuum fine, combustible dust particles that can 

ignite and potentially lead to an explosion.

• 

Do not put foreign objects into openings. Do not use the 

vacuum with any opening blocked; keep all openings free 

of dust, lint, hair, and anything that may reduce air flow.

• 

Always check the hose and the unit when vacuuming.

4

Содержание SWD4000

















Отзывы: