11
3. Snap the desired nozzle onto the Quick-Connect collar
until it
clicks
into place (Fig. 16).
To disconnect a nozzle from the spray wand once the cleaning
job is complete:
4.
Turn off the pressure washer and shut off the water supply.
Pull the trigger to release water pressure.
5. Engage the safety lock on the trigger handle by pushing
up on the safety lock until it
clicks
into the slot (Fig. 12).
6. Remove the nozzle by placing your hand over the nozzle
while pulling back on the Quick-Connect collar.
m
WARNING!
Do not make changes to the nozzle while
the trigger is engaged. Doing so could result in damage to the
pressure washer or injury to the user.
Working with Detergents
When cleaning with the pressure washer, some cleaning tasks
can be solved with water alone, but for most tasks cleaning
with detergent allows for more effective dirt removal.
m
WARNING!
Use only detergents specifically designed
for use with pressure washers, such as Sun Joe
®
HOUSE +
DECK WASH (SPX-HDC1G), Sun Joe
®
SNOW FOAM AUTO
WASH (SPX-FCS1G), or Sun Joe
®
HEAVY DUTY CLEANER
(SPX-APC1G).
DO NOT USE household detergents, acids,
alkaline solutions, bleaches, solvents, flammable material, or
industrial grade solutions. These could damage the pressure
washer. Many detergents may require mixing prior to use.
Prepare the cleaning solution as instructed on the solution
bottle.
m
WARNING!
When being used with detergent, make
sure to use the black soap quick-nozzle.
1. Remove the detergent tank cap with suction tube. Gently
pull the detergent tank out of its storage position
(Figs. 17 – 18).
Fig. 15
Safety lock
Slot
Fig. 16
Nozzle
“Click”
Spray wand quick-
connect collar
Fig. 17
Detergent tank
cap with
suction tube
Detergent
tank
Fig. 18
Detergent
tank
