background image

10

Using Nozzles

Before beginning any cleaning task, determine the best nozzle  

for the job. Each of the nozzles has a different spray pattern. 

The nozzle patterns are 40˚ (for gentle cleaning), 15˚ (for tough 

jobs), 0˚ (for spot cleaning or hard-to-reach areas), and the 

turbo nozzle. The turbo nozzle is a zero-degree rotary nozzle 

that spins the spray in a circle so it has a wider cleaning swath. 

m

CAUTION! 

NEVER change nozzles without locking the 

safety lock on the trigger handle.

m

WARNING! 

High-pressure jets can be dangerous if 

subject to misuse. The jet must not be directed at persons, 

pets, live electrical equipment, or the appliance itself. 
This electric pressure washer is equipped with four (4)  

Quick-Connect nozzles that easily snap onto the  

Quick-Connect collar of the spray wand (Fig. 16).

To connect a nozzle to the spray wand:

1.  Turn off the pressure washer and shut off the water supply. 

Pull the trigger to release water pressure.

2.  Engage the safety lock on the trigger handle.
3.  Pull back the brass Quick-Connect collar and insert the 

desired nozzle into the collar. Release the collar and the 

nozzle will click into place (Fig. 17).

To disconnect a nozzle from the spray wand once the cleaning 

job is complete:

1.  Turn off the pressure washer and shut off the water supply. 

Pull the trigger to release water pressure.

2.  Engage the safety lock on the trigger handle.
3.  Remove the nozzle by disconnecting it while pulling back 

the brass Quick-Connect collar.

m

WARNING! 

Do not make changes to the nozzle while 

the trigger is engaged. Doing so could result in damage to the 

pressure washer or injury to the user.

Working with Detergents

When cleaning with the pressure washer, some cleaning tasks 

can be solved with water alone, but for most tasks cleaning 

with detergent allows for more effective dirt removal. 

m

WARNING! 

Use only detergents specifically designed 

for use with pressure washers, such as Sun Joe

®

 HOUSE + 

DECK WASH (SPX-HDC1G), Sun Joe

®

 SNOW FOAM AUTO 

WASH (SPX-FCS1G), or Sun Joe

®

 HEAVY DUTY CLEANER 

(SPX-APC1G). DO NOT USE household detergents, acids, 

alkaline solutions, bleaches, solvents, flammable material,  

or industrial grade solutions. These could damage the  

pressure washer. Many detergents may require mixing prior  

to use. Prepare the cleaning solution as instructed on the 

solution bottle.

1.  Gently pull the foam cannon bottle out of its storage 

position (Fig. 18).

2.  Remove the cap. Fill the bottle or mix as recommended by 

detergent instructions (Fig. 19), and secure the cap back 

into place. Replace it back on the unit.

Fig. 16

Fig. 17

Spray wand quick-

connect collar
Nozzle

Pull back

Fig. 18

Foam cannon 

bottle

Содержание SPX2700-MAX-RM





















Отзывы: