sunjoe SJ1440SG, Руководство оператора

Страница: 9 / 24

9
4. Use 2 x 25 ft (2 x 7.6 m) solar connector cables if
necessary.
5. Align the branch connectors with solar connector cables,
insert male end and press firmly until the locking tabs
‘click’ together securely (Figs. 7 & 8).
6. Plug the other end of the solar charging output of the solar
panels. Positive branch connector to solar charging input
POSITIVE (+) terminal (Fig. 9).
7. Plug the negative branch connector to solar charging
input NEGATIVE (-) terminal (Fig. 10).
8. While the system is charging, the solar charging indicator
will be illuminated, the backlight will be illuminated for 5
seconds and the beeper will sound (Fig. 11).
9. While in charging-only mode, no output loads/devices
are connected, only input power, battery level and solar
charging indicators will be displayed (Fig. 11).
10. To read the battery current voltage, turn the unit on.
Push and hold the ON/OFF button for approximately
1.5 seconds and release the button when the unit beeps
(Fig. 12).
Fig. 7
Branch
connectors
Solar connector cables
Solar
panel cables
Fig. 8
Locking tabs
Fig. 9
Solar charging output
(+) branch connector
Solar charging input
(+) terminal
Fig. 10
Solar charging input
(-) terminal
Solar charging output
(-) branch connector
Fig. 11
Battery level Charging
power
Solar charging
Solar Charging-Only Mode
Fig. 12
Battery current voltage
Press and hold 1.5 seconds