sunjoe Sharper Blade SB600E, Руководство оператора

Страница: 6 / 12

6
4) Place the Shield over the blade shaft and snap into place
(Fig. 3).
5) Assemble the plastic flower guard attachment to the steel
flower guard. There are 3 positions to meet different blade
lengths. First insert the slot of the plastic plate into the
steel bar (Figure 4).
6)
Rotate the plastic flower guard attachment away from you
till the plastic is close to the steel bar and the two bottom
corner slots of the plastic feet snap in place to the steel bar
(Figure 5). This is position 1, the diameter of the protection
area is 12 inches.
7) Turn the plastic flower guard attachment towards you till
the plastic is close to the steel bar and the two bottom
corner slots of the plastic feet snap to the steel bar (Figure
6). This is position 2, now the diameter of the protection
area is 11 inches.
8) Remove the plastic flower guard attachment. (Figure 7).
Now in position 3, the diameter of the protection area is 9.5
inches.
9) Ultimately you can remove the flower guard from the motor
cover. This will allow you maximum use of the Sharper
Blade.
NOTE: Be careful when operating the machine while steel
flower guard is removed.
Click slot to
the steel bar
slot 2
slot 1
slot 4 slot 3
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7