sunjoe SDJ616-RM, Руководство оператора, Страница: 3 / 12

3
DOUBLE-INSULATED: GROUNDING NOT
REQUIRED. WHEN SERVICING, USE ONLY
IDENTICAL REPLACEMENT PARTS.
This leaf mulcher/shredder is double-insulated, eliminating
the need for a separate grounding system. Use only identical
replacements parts. Read the instructions before servicing
double-insulated leaf shredders. Use this leaf mulcher/
shredder only as described in this manual.
m
WARNING!
To reduce the risk of electric shock, do
not expose to rain. Store indoors.
m
WARNING!
For your own safety, read and
understand the operator’s manual. Do not run the unit
unattended.
m
CAUTION!
To reduce the risk of injury from moving
parts, unplug the unit before cleaning or servicing.
Additional Safety Rules for
Leaf Mulcher/ Shredder
1. Become familiar with all sections of this owner’s manual
before attempting to operate the leaf mulcher/shredder.
This leaf mulcher/shredder should be used solely for the
purpose for which it is intended.
2. Use only parts or accessories specifically designed for
use with this leaf mulcher/shredder. Using other parts or
accessories could increase risk of injury.
3. Keep your hands and other body parts and loose articles
of clothing away from the funnel and upper housing area.
4. Avoid dangerous environments – Do not use the leaf
mulcher/shredder in damp or wet locations. Do not
operate in rain. Store indoors when not in use, in a dry and
high or locked-up place out of the reach of children.
5. This leaf mulcher/shredder should be operated on a solid,
level surface.
6.
m
WARNING! To reduce the risk of electrical shock, use
only an extension cord intended for outdoor use.
7. If for any reason you need to inspect, clean, or repair the
leaf mulcher/shredder, turn the unit off and wait until it
comes to a complete stop. Then, disconnect the power
cord before conducting such inspection or repair.
8. Disconnect the leaf mulcher/shredder from the power
source when it is not in use, before servicing, and when
replacing the cutting lines.
9. When feeding material into the leaf mulcher/shredder,
make sure that you do not accidentally insert pieces of
metal, rocks, bottles, cans, or other foreign objects.
10. Do not force the leaf mulcher/shredder. It will do the job
better and with less likelihood of injury if it is used at the
rate for which it was designed.
11. If the cutting mechanism strikes a foreign object or if
you notice an unusual rattling noise or vibration coming
from the leaf mulcher/shredder, immediately switch off
the unit and wait until it comes to a complete stop. Then,
disconnect the power cord and follow the steps below:
a) Remove any foreign or clogged material.
b) Check for any loose parts and tighten them to ensure
continued safe operation.
c) Replace or repair any damaged parts.
12. Check the discharge area periodically after stopping
the leaf mulcher/shredder to ensure that the processed
material does not build up and clog the motor cooling
vents.
13. Do not move the leaf mulcher/shredder when the motor is
running or when your finger is on the switch.
Unpacking
Due to modern mass production techniques, it is unlikely
that your power tool is faulty or that a part is missing.
If your power tool does not arrive intact, do not operate the
tool until the parts have been replaced or the fault has been
rectified. Contact the Snow Joe
®
/Sun Joe
®
customer service
center for assistance. Failure to do so could result in serious
personal injury.