10
Maintenance
m
WARNING!
Always disconnect the power and ensure
built up pressure has been released from the tool before
cleaning, repairing, or inspecting the log splitter.
Before every use:
•
Clean the machine.
• Check safety labels and guards are in place.
• Check for damaged or worn parts, alignment of moving
parts, and tightness of bolts and screws.
Every 150 hours of use:
•
Replace the hydraulic oil. Follow these steps:
a.
Place container to capture drained oil on flat, stable
surface. The container must hold a minimum of 3
liters (0.8 gallons).
b.
Unscrew the oil drain bolt.
c.
Turn the machine over on the motor side and drain
the oil.
d.
Return the machine to the upright, operating
position.
e.
Refresh the hydraulic oil. Recommended oils: Shell
Tellus T22, Aral Vitam GF22, SP Energol HCP22,
Mobile DTE 11 or equivalent. Do not use other
grade oils.
Periodically:
•
Sharpen the wedge. Use a fine tooth file, take off burrs
and smooth rough sections of the cutting edge.
• Keep moving parts lubricated.
Storage
When not in use, always store the machine in a secure location
that children cannot access. Store the machine in a dry
environment. The machine can be transported or stored in the
ambient temperature between 25ºC – 55ºC (77ºF – 131ºF).
Service and Support
If your Sun Joe Electric Log Splitter requires service or
maintenance, please call 1-866-766-9563 for assistance.
Model and Serial Numbers
When contacting the company or reordering parts, you will
need to provide the model and serial numbers of the product,
which is found on the rear of your log splitter. Copy these
numbers into the space provided below.WARNING! Do not
tamper or remove any of the protection/safety devices.
Record the following numbers from the housing or handle of your
new product:
L J 6 0 1 E
Model #:
Serial #:
Содержание LOGGER JOE LJ601E
Страница 11: ...NOTES 11 ...
