sunjoe GTS4001C-LT-RM Скачать руководство пользователя страница 14

Страница: 14 / 32

3. Lock the pole in position by closing the telescoping lock

(Fig. 17), and ensure that the pole is secured.

WARNING!

Failure to lock the telescoping lock as

directed could result in personal injury.

Adjusting the Multi-Angle Head

The pole chain saw head can be rotated for different cutting

angles for 0º, 15º, and 30º (Fig. 18). Follow the below

instructions to adjust angles.

1. Rotate the chain saw head to the desired cutting angle

while pressing the rotating buttons located on both sides

simultaneously (Fig. 19).

2. Release the buttons when the chain saw head is set to the

desired angle.

NOTE: Failure to properly secure the chain saw head may

result in personal injury and/or property damage.

WARNING!

Always ensure the chain saw head is

securely locked! Do not attempt to use the pole chain saw with

the head in any other position or unlocked!

Cutting Tips for Pole Chain Saw

CAUTION!

•

Before starting the saw, remove the oil tank cap and add

bar & chain oil to the top of the oil level window (Fig. 20).

One minute of use will consume approximately

0.15 fl oz

(4 ml) of oil. Refill when the oil level drops to 1/4 of a tank.

NOTE: Your pole chain saw head

is equipped with an

automatic oil pump for bar and chain oiling. You must add

bar and chain oil or your pole chain saw will not function.

WARNING!

Be sure that the chain is not in contact with

any object when you start the motor.

WARNING!

Keep hands away from chain. Keep hands

on handles. Do not overreach.

A good, firm grip on the tool using both hands will help you

maintain control. Place one hand on the soft grip or the

telescoping pole, and the other hand on the handle with your

thumbs and fingers encircling the pole and handle. A firm grip

Fig. 16

Pull

Telescoping lock

Fig. 17

Telescoping lock

Fig. 18

0º

15º

30º

Fig. 19

Rotating button

Front Side

Back Side

Rotating button

Fig. 20

Oil tank cap

Oil level

window

Содержание GTS4001C-LT-RM

































Результаты поиска

Содержание GTS4001C-LT-RM

Отзывы:

Бренды по названию

Популярные бренды

sunjoe GTS4001C-LT-RM, Руководство оператора

Результаты поиска

Содержание GTS4001C-LT-RM

Отзывы:

Бренды по названию

Популярные бренды