sunjoe 24V-XFP5-CT, Руководство оператора

Страница: 10 / 20

10
not to leave the battery plugged into the charger. Switch
off or unplug the charger at the mains when charging is
complete.
5. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
6. When charging is complete, remove the battery from the
charger by pulling the push lock buttons and sliding the
battery backward to unlock it from the charger.
Assembly
m
WARNING!
Do not insert the battery before the unit is
fully connected with hoses and ready for use.
1. The equipment comes fully assembled. If needed, fasten
it securely to a suitable surface (e.g., a work-bench) in a
suitable place (protected against dust, dry, well-lit) with
the 4 provided M5 tapping screws (Fig. 4). Otherwise,
place the pump on a level, dry surface securely.
2. Connect a discharge hose onto the water outlet. It's
recommended to use a garden hose with standard 3/4"
GHT female connector. Thread to secure (Fig. 5).
3. Add two drops of oil into the water inlet before and after
each use (Fig. 6).
4. Connect the female end of the included intake hose onto
the water inlet. Thread to secure (Fig. 7).
Fig. 4
Base
Screws
Fig. 5
Discharge hose/Garden hose
Standard 3/4" GHT
female connector
Water outlet
Fig. 6
Oil bottle
Water inlet
Fig. 7
Intake hose
Water inlet