background image

5

8.  Never use or charge batteries if you suspect that it has 

been more than 12 months since the last time they were 

charged. There is a high probability that the battery pack 

has already suffered dangerous damage (exhaustive 

discharge).

9.  Charging batteries at a temperature below 41°F (5°C) will 

cause chemical damage to the cells and may cause a fire.

10. Do not use batteries that have been exposed to heat 

during the charging process, as the battery cells may have 

suffered dangerous damage. 

11. Do not use batteries that have suffered curvature or 

deformation during the charging process or those that 

exhibit other atypical symptoms (gassing, hissing, 

cracking, etc.).

12. Never fully discharge the battery pack (maximum 

recommended depth of discharge is 80%). A complete 

discharge of the battery pack will lead to premature aging 

of the battery cells.

Protection from environmental influences

1.  Wear suitable work clothes. Wear safety goggles.
2.  Protect your cordless tool and the battery charger from 

moisture and rain. Moisture and rain can cause dangerous 

cell damage.

3.  Do not use the cordless tool or the battery charger near 

vapors and flammable liquids.

4.  Use the battery charger and cordless tools only in dry 

conditions and at an ambient temperature of 41°F – 105°F  

(5°C – 40.5°C).

5.  Do not keep the battery charger in places where the 

temperature is liable to reach over 104°F (40°C).  

In particular, do not leave the battery charger in a car that 

is parked in the sunshine.

6.  Protect batteries from overheating. Overloads, 

overcharging and exposure to direct sunlight will result 

in overheating and cell damage. Never charge or work 

with batteries that have been overheated – replace them 

immediately, if possible.

7.  Store the charger and your cordless tool only in dry 

locations with an ambient temperature of 40°F – 105°F  

(4.5°C – 40.5°C). Store your lithium-ion battery pack in a 

cool, dry place at a temperature of 50°F – 68°F  

(10°C – 20°C). Protect the battery pack, charger and 

cordless tool from humidity and direct sunlight. Only place 

fully charged batteries in storage (charged to at least 40%).

8.  Prevent the lithium-ion battery pack from freezing.  

Battery packs that were stored below 32°F (0°C) for more 

than 60 minutes must be discarded.

9.  When handling batteries, be wary of electrostatic 

charge. Electrostatic discharges can damage the 

electronic protection system and the battery cells. Avoid 

electrostatic charging and never touch the battery poles.

Содержание 24V-TLR-LTE-RM





















Отзывы: