background image

11

IMPORTANT! Never allow the battery pack to become fully 

discharged as this will cause irreversible damage to the 

battery. 

6.  When charging is complete, remove the battery from the 

charger by pulling the push lock button and sliding the 

battery backward to unlock it from the charger.

Assembly

m

WARNING!

 The hedge trimmer must be fully assembled 

before operation! Do not use a hedge trimmer that is only 

partly assembled or assembled with damaged parts!
Follow the assembly instructions step-by-step and use the 

figures provided as a visual guide to easily assemble the hedge 

trimmer.
Do not insert the battery before it is completely assembled.
NOTE: Take care of small parts that are removed during 

assembly or when making adjustments. Keep them secure to 

avoid loss.

1.  Snap the front handle into place on the unit. (Fig. 4). 

2.  Secure the front handle onto the unit with the 4 front 

handle screws (Fig. 5). When the screws are fully secured, 

your hedge trimmer is ready to use. 

Operation

m

WARNING! 

Always wear safety goggles or safety 

glasses with side shields when operating power tools.  

Failure to do so could result in objects being thrown into your 

eyes, resulting in possible serious injury.

m

WARNING! 

Do not use any attachments or accessories 

not recommended by the manufacturer of this product.  

The use of attachments or accessories not recommended can 

result in serious personal injury.

Holding the Trimmer

Before operating the hedge trimmer, stand in the operating 

position and perform the following checks:

1.  You are wearing all of the necessary personal protective 

equipment, including protective gloves, non-slip footwear, 

safety goggles, ear defenders, and close-fitting clothing. 

2. 

You are holding the unit firmly with both hands. Your right 

arm is slightly bent and is holding the rear handle, and 

your left arm is straight and is holding the front handle. 

3.  You are standing with proper footing and are holding the 

hedge trimmer so that the cutting blades are always away 

from your body.

m

WARNING! 

Always keep both hands on the hedge 

trimmer handles. Never hold shrubs with one hand and operate 

the hedge trimmer with the other. Improper handling of the 

hedge trimmer could result in serious injury.

St Stopping

m

WARNING! 

Ensure the blade does not touch any 

objects before turning on the hedge trimmer.

m

CAUTION!

 Starting, stopping, and restarting a DC 

motor repeatedly within a few seconds can generate a great 

deal of heat and damage the motor. To protect the life of your 

cordless hedge trimmer, always wait at least five seconds after 

stopping before restarting the hedge trimmer.

1.  Remove the blade cover and insert the battery in the 

battery compartment (Fig. 6).

2.  To start the tool, press and hold the safety lock button, 

then squeeze the On/Off trigger. Once the tool is running, 

you can release the lock button (Fig.7).

Fig. 4

Front handle

Front 

handle 

screw

Front handle

Fig. 5

Front handle screws

In order to operate this cordless hedge trimmer you will need 

an iON+ 24V System battery and charger. See page 15 for 

battery and charger options and specifications, or for more 

information visit sunjoe.com.

TOOL ONLY

B CHARGER SOLD SEPARATELY

Fig. 6

Battery

Battery compartment

Содержание 24V-HT22-CT

















Отзывы: