background image

A Division of Snow Joe

®

, LLC

Model 24V-DD-LTE

Form No. SJ-24V-DD-LTE-880E-M

R

OPERATOR’S MANUAL

© 2018 by Snow Joe

®

, LLC

All rights reserved. Original instructions.

SAVE THESE INSTRUCTIONS

1

CORDLESS DRILL/DRIVER

24-VOLT MAX | 2.0 Ah | TOOL CASE

IMPORTANT!

Safety Instructions
All Operators Must Read These 

Instructions Before Use

Always follow these safety guidelines. Failure to do so may 

result in serious bodily injury or death.

General Safety 

m

WARNING!

 

When using the drill/driver basic safety 

precautions should always be followed to reduce the risk of 

fire, electric shock, and personal injury. These include:

Work Area Safety

1.  Keep work area clean and well-lit – 

Cluttered, dark 

areas invite accidents.

2.  Keep children, bystanders, and pets away – All 

spectators, including pets, should be kept a safe distance 

away from the work area.

3.  Do not operate power tools in explosive atmospheres 

– 

Such as in the presence of flammable liquids, gases, or 

dust. Power tools create sparks which may ignite the dust 

or fumes.

Personal Safety

1.  Stay alert – Watch what you are doing. Use common 

sense. Do not operate the drill/driver when you are tired, 

or under the influence of alcohol or drugs.

2.  Dress properly – Do not wear loose clothing or jewelry. 

They can get caught in moving parts. Loose clothes, 

jewelry, or long hair can be caught in moving parts.

3.  Avoid unintentional starting – Do not carry the drill/driver 

with your finger on the trigger. Make sure the switch is off 

before connecting the drill/driver to power source.

4.  Do not overreach – Keep proper footing and balance at 

all times. Proper footing and balance enable better control 

of the cordless drill/driver in unexpected situations.

5.  Use personal protective equipment – Always wear eye 

protection. Protective equipment such as dust mask, non-

skid safety shoes, hard hat, or hearing protection used for 

appropriate conditions will reduce personal injuries.

6.  If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 

connected and properly used. – Use of dust collection 

can reduce dust-related hazards.

7.  Do not use on a ladder or unstable support – Stable 

footing on a solid surface enables better control of the 

power tool in unexpected situations.

Tool Use and Care

1.  Do not force the tool – It will perform better with less 

likelihood of personal or mechanical injury if it is used at 

the rate for which it was designed.

2.  Do not use drill/driver if switch does not turn on or off 

– 

The 

drill/driver that cannot be controlled with the switch 

is dangerous and must be repaired.

3.  Disconnect the plug from the power source and/or 

battery pack from the drill/driver before making any 

adjustments, changing accessories, or storing the 

drill/driver – Such preventive safety measures reduce risk 

of starting the power tool accidentally.

4.  Store idle drill/driver out of reach of children or other 

untrained persons – Drill/driver is dangerous in the hands 

of untrained users.

5.  Maintain cordless drill/driver – Check for misalignment 

or binding of moving parts, breakage of parts, and any 

other condition that may affect the drill/driver's operation. 

If damaged, have the drill/driver serviced before using. 

Many accidents are caused by poorly maintained tools.

6.  Use the power tool, accessories and tool bits etc. 

in accordance with these instructions, taking into 

account the working conditions and the work to be 

performed – 

Use of the power tool for operations different 

from those intended could result in a hazardous situation.

Battery Tool Use and Care

1.  Recharge only with the charger specified by the 

manufacturer – A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 

another battery pack.

2.  Charge internal battery at ambient temperatures 

between 50ºF – 104ºF (10ºC – 40ºF).

3.  Under abusive conditions, liquid may be ejected from 

the battery; avoid contact. If contact accidentally 

occurs, flush with water. If liquid contacts eyes, seek 

medical help – 

Liquid ejected from the battery may cause 

irritation or burns.

Содержание 24V-DD-LTE

















Отзывы: