© 2021 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
1
A Division of Snow Joe
®
, LLC
OPERATOR’S MANUAL
Model 24V-300WI
Form No. SJ-24V-300WI-880E-M
R
CORDLESS POWER STATION
24V MAX* | 300 WATTS
EN
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/
or serious injury.
m
WARNING!
To reduce the risk of injury, fire, or electric
shock, the user must read and understand the operator’s
manual for their USB accessories and AC devices in addition
to this Operator’s Manual. Ensure compatibility before
using this power station. Do not use this product if a part is
damaged or missing.
General Safety WARNINGS!
Notice the personal safety alert symbol
m
used in this manual
to draw your attention to a WARNING given along with the
particular operating instruction. This means that the operation
requires special ATTENTION, CAUTION, and AWARENESS.
m
WARNING!
This power station is only for use with
Snow Joe
®
+ Sun Joe
®
iON+ 24V series batteries.
m
WARNING!
Dry location use only. DO NOT expose to
rain.
1. Read all the instructions before using the product.
2. NEVER leave the power station on and unattended.
Unattended operation of this product could result in
personal injury or property damage. Switch off the power
station when not in use.
3. To reduce the risk of injury, close supervision is necessary
when the product is used near children.
4.
Do not put fingers or hands into the product.
5. Use of an attachment not recommended or sold by power
station manufacturer may result in a risk of fire, electric
shock, or injury to persons.
6. To reduce risk of damage to the electric plug and cord,
pull the plug rather than the cord when disconnecting the
power station.
7. ALWAYS ensure that the power station's AC charger
is easily accessible during operation to allow for quick
disconnection from the mains.
8. Do not operate the power station with a damaged cord or
plug, or a damaged output cable.
9. Do not use a power station or appliance that is damaged
or modified. Damaged or modified products may exhibit
unpredictable behavior resulting in fire, explosion or risk of
injury.
10. When charging battery pack(s), work in a well-ventilated
area and do not restrict ventilation in any way.
11. ALWAYS operate the power station in a clean, dry, well
ventilated area. Make sure hands are dry before touching
this product. Water can conduct electricity! Water coming
in contact with electrically charged components can
transmit electricity resulting in electrical shock to anyone
contacting them.
12. Do not expose the power station to rain or wet conditions.
Water entering the power station will increase the risk of
electric shock.
13. Do not insert battery pack(s) into compartment(s), plug
the power station in, or plug any device into the power
station’s power receptacle if moisture is detected on or in
the power station.
14.
Place the power station on a stable, flat surface where it
will not fall or tip over.
15. Do not use the power station to power medical or other
critical devices.
16.
Do not expose the power station to fire or excessive
temperature. Exposure to fire or temperature above 212°F
(100°C) may cause explosion.
17. The power station is not intended for any use other than
charging USB electronics (up to 3 amp for each USB port)
or AC devices (up to continuous 300 W). Any other use
may result in system shut down or even damage.
18. The power station is not intended for use in a commercial
repair facility.
19. Do not disassemble the power station, take it to a
qualified service person when service or repair is required.
Incorrect reassembly may result in a risk of fire or electric
shock.
