- 28 -
SUNIX Co., Ltd.
TEL : +886-2-8913-1987
Email : [email protected]
Section 7:
This section is used to select different modes for serial ports. In RS 485 mode,
DTR signal mode is enabled to set a suitable value for different line drivers.
Section 8:
This section enables remote wake up feature. Remote wake up can be
enabled by checking.
Section 9:
When working in Hyper Threading / Dual Core PC's, check the
Enable
Threshold
option to set the default value of 0x100 i.e., 256 bytes for
completion. Or change the value as per requirement.
4. When serial device requires setting to a specific COM number, confirm the
port number match the settings required for your serial device. Note that
Under Windows 98, you will not be able to change the COM port number.
You need to use the default COM port number assigned by the OS.
SAFTY FIRST
Unplugging or ejecting a device without first stopping them can often
cause your computer to crash and lose valuable data. To safely unplug
or eject any of the USB to RS-232 devices, firstly use the hardware
wizard in the control panel to stop the devices. Or you can use the
“
Safety Remove
” icon on the taskbar to quickly unplug or eject your
devices.
