Sunheat WL15BTS-B, Инструкции по безопасности и руководство по эксплуатации, Страница: 8 / 13

9
⚫
There must be a distance of at least 2 feet at each side between the
appliance and walls or the like. See figure 2.
⚫
Recommended degree to mounting surface is 45°. See figure 3.
⚫
Pay attention that, the installation of the appliance does not add excessive
wind load.
⚫
Fix the mounting bracket to the ceiling first. Ensure the place to be
installed is secure and firm. Then fix the appliance to the bracket.
⚫
Adjust the desired angle of radiation and test to make sure unit is secure.
Periodiaclly check to make sure unit is secure. Mechanical bearing
pressure and oscillation due to wind or rain could lead to loose
connections.
⚫
Plug in the power source and operate the remote control. Then observe,
the first 10-15 minutes to ensure the appliance works trouble-free.
⚫
If you do not use heater for long periods, it is suggested to remove
batteries from the remote.
Cleaning and Maintenance
⚫
This appliance consists of a robust and maintenance-free aluminum casing
with a protection cover. No user serviceable parts inside.
⚫
Before cleaning, remove the plug from the power outlet and wait until the
appliance has sufficiently cooled off.
⚫
Wipe the appliance only with clean and lint-free cloth or a soft brush.
⚫
Never use abrasive cleaners, scrubbing brushes and chemical cleaners for
cleaning!
⚫
Can use alcohol to clean the appliance.
⚫
To protect against electrical shock and danger of life, do not immerse cord,
plug, or any part of the appliance in water or other liquid.
⚫
For heating element replacement, please contact the manufacturer or its
service agent or a similarly qualified person.
⚫
For other service, please contact with SUNHEAT International or a suitably
qualified electrician.