Sunheat PHTR-LED, Руководство пользователя

Страница: 11 / 25

ASSEMBLY INSTRUCTIONS
11
11. Assembly the protective guard and mesh
Insert the hooks of protective guard (F) to the
11
holes of upper supports (E). F B
Put the mesh (B) on the top plate (D). Make sure
the screw holes align the holes of top plate (D).
Use Phillips screwdriver (LL) to secure the
mesh (B) and protective guard (F) to the top
DD
plate (D) with M5 x 12 mm screws (DD) and
fixing bracket (FF).
Hardware Used
DD M5 x 12 mm Screw
x 3
FF
Fixing Bracket x 3
Phillips
LL
Screwdriver
x 1
12. Carefully lean the assembly and attach
12
AA
reflector (A) to mesh (B) with studs (CC),
A
small flat washers (BB) on either side of
reflector (A) and then wing nuts (AA).
BB
Gently return the assembly to the upright
CC
position.
Hardware Used
AA
Wing Nut
x 3
BB
Small Flat
x 6
Washer
CC
Stud x 3
FF