Sunheat F-15 Gen III, Руководство по ремонту

Страница: 33 / 38

T
Replace Power Cord
To gain access to the power cord fallow steps (A), (B) . Remove the power
leads from the circuit board.
To gain access to the lock nut that holds the ground wire in place, fallow
steps (C) & (D) . Using a 7mm wrench hold the lock nut that holds the ground wire
in place from the underside of the metal case. Use a 3mm Allan wrench to loosen
the screw the runs through the ground wire & metal panel.
Ground Wire
Power Cord Leads