31
According to your
needs, and sometimes you must disable the USB port to the release of system
resources for other devices.
5.2 Use an external display (VGA port)
1.
Your UMPC equipped with 15 - pin VGA port connector of any external color
VGA display. You need to show a signal line (usually provided by the monitor).
One end of the cable must be 15 - pin connector to connect UMPCs.
2.
Connecting external display:
3.
1. Identified and shut down the UMPC power supply monitors have been
closed.
Connect monitors, UMPC power to close or idle. Although you can connect
external monitor without having to turn off the UMPC and external display power,
however, this way of the two devices are harmful and will reduce the life span of
these devices.
4. Display monitor cable to connect to a UMPC back of the VGA ports, and
connectors on the cable locking screws.
5. Stuck in the walls display the power cord socket on the ground connection.
6. Opening display power.
7. Opening the UMPC's power supply. And the display screen will also display.
Your UMPC can be displayed by default.
8. If you want to display only on the display screen or projector and on the LCD
screen closed, click <Fn> + <F10 button and switch liquid crystal display screen,
hold down the hotkey until only appears on the display screen of.
Please refer to Chapter 3 of the available VGA resolution and how to change
display options.
