Sungrow SG250HX, Руководство пользователя

Страница: 28 / 109

18
N No o..
S Sp pe ec ciiffiic ca attiio on n//T Tyyp pe e
e Opening:13, 16mm, 17mm
f PV-CZM-41100
g
PV-MS-PLS
h Range ≥ 1500Vdc
i PV-EVO-PST
j Torque wrench with terminal 1/2” or Torque wrench 17mm
4.4 Moving the Inverter
Move the inverter to the specified position before installation. The inverter can be moved
manually or via a hoist.
4.4.1 Manual Transport
Step 1 Release the sealing screws on the mounting ears with a flat-head screwdriver and store
them properly. Anchor the four supplied screw-in handles to the mounting ears and
base of the inverter.
Step 2 Lift and move the inverter to the destination by using the side and bottom handles as
well as the four installed handles.
Step 3 Remove the screw-in handles and reassemble the sealing screws released in Step 1.
Inappropriate moving operation may cause personal injury!
It is recommended that at least four installers carry the inverter together and
wear protective equipment such as smash-proof shoes and gloves.
Always beware of the gravity center of the inverter and avoid tipping.
The ground surface on which the inverter is to be placed should be covered with
a sponge pad, foam cushion or the like to prevent the inverter bottom from
scratches.
-- -- E En nd d
4 Mechanical Mounting User Manual