SunFounder Sensor Kit V1.0 Скачать руководство пользователя страница 90

Страница: 90 / 90

For Safe Use

All parts and devices in this kit should be powered appropriately in compliance with

relevant regulations and standards applicable in the country of intended use.

The connection of unapproved external devices to the modules/boards in this kit may

affect compliance or result in damage to the unit, for which we will not be responsible.

To avoid malfunction or damage to your circuit boards, please observe the following:

DO NOT expose it to water/moisture or place it on a conductive surface whilst in
operation.

DO NOT expose it to heat from any source; the product is designed for reliable
operation at normal ambient room temperatures.

Take care whilst handling to avoid mechanical or electrical damage to the
printed circuit board and connectors.

PLEASE perform the connection or wiring based on the instructions in the manual
or our website if you are not clear of the results.

Copyright Notice

All contents including but not limited to texts, images, and code in this manual are owned

by the SunFounder Company. You should only use it for personal study, investigation,

enjoyment, or other non-commercial or nonprofit purposes, under the related regulations

and copyrights laws, without infringing the legal rights of the author and relevant right

holders. For any individual or organization that uses these for commercial profit without

permission, the Company reserves the right to take legal action.

SunFounder

Содержание Sensor Kit V1.0



























































































Результаты поиска

Содержание Sensor Kit V1.0

Отзывы:

Похожие инструкции для Sensor Kit V1.0

Бренды по названию

Популярные бренды

SunFounder Sensor Kit V1.0, Руководство пользователя

Результаты поиска

Содержание Sensor Kit V1.0

Отзывы:

Похожие инструкции для Sensor Kit V1.0

Бренды по названию

Популярные бренды