2
carE & maintEnancE
• From time to time, ensure the plug between the solar panel and light is securely connected.
• It is advisable to adjust the angle of the solar panel to optimize the exposure of the sun during the
winter months.
• The solar panel should be cleaned with a damp cotton cloth on a regular basis. This will ensure optimal
performance and battery charging. Periodically, utilize the same technique to clean the lenses of the
motion lights.
• Never let any abrasive material come into contact with the solar panel.
installation
Ensure your solar panel is placed so that its exposure
to the sun is optimized. Be aware of objects such
as trees or property overhangs that may impede the
panel’s ability to generate a charge. The angle of the
solar panel can be adjusted utilizing the pivot point
where the panel attaches to the bracket. This allows
you to maximize sun exposure.
Optional: Use a power drill (not included) to create
the holes on your chosen mounting surface.
Use 4 of the included wall plugs and screws to
fasten the solar panel to the surface.
Insert the two remaining screws and wall
plugs into the surface, leaving 3.2 mm
(1/8 in) of space between the screw heads
and the wall. Place the motion light’s
mounting bracket onto the screw heads (1).
Lock the bracket into place by shifting it
horizontally (2).
Place the mounting bracket template (refer
to template shown below or use provided
insert) over the desired mounting surface.
Mark the screw hole locations indicated by
the symbol.
Use a power drill (not included) to drill the
holes on your chosen mounting surface.
moUnting BracKEt tEmplatE instrUctions
1. Cut out the template or use the provided insert.
2. Mark the screw hole locations ( X ) using a pencil or drill.
3. Drill holes in the marked locations.
• Your motion light is not a toy. Keep it out of reach from small children.
• Your motion light and solar panel are both weather-resistant.
• You can mount your motion light indoors, but your solar panel must be installed outdoors to receive light
from the sun.
• If using a step ladder, you may require a second person to help install the solar motion light.
• Prior to installation, lay out all components and check against the part list section in this manual.
• Never look directly into the solar motion light when illuminated.
safEty information
When replacing the batteries, be sure to:
• Use rechargeable batteries only.
• Match the replacement battery specifications with the batteries that have been removed.
• Observe the correct polarity (+ and -) when installing the replacement batteries.
• Do not mix old and new batteries and Do not mix alkaline, standard (carbon-zinc)
or rechargeable (ni-cad, ni-mh, etc.) batteries.
Refer to page 3, step 9 for further details.
BattEry rEplacEmEnt instrUctions
Warranty
proDUct fEatUrEs
This product is covered under a one year limited warranty. Sunforce Products Inc. warrants to the original
purchaser that this product is free from defects in materials and workmanship for the period of one year from
date of purchase. The included batteries are not covered under this warranty.
Proof of purchase including date, and explanation of complaint is required for warranty service.
• 50 LEDs per lamp head
• Adjustable motion sensor
• Adjustable time and distance settings
• Solar panel with 15 ft wire
1.7 in
1
2
4
5
3
2
1
NOTE:
Recommended tools:
Power drill or screwdriver
Screw type: Phillips #2
360
o