http://www.sunflower
‐
solar.com/
Version
11.03
Subjec
tto c
hange 2011
SUNF
LOWER SOLAR
7
Steps 4: Assembly other short frame parts (3 Cross-bars and 6 Cross braces assembly), the finally installation
as follow:
Fig 3.4
3.3.2 Water Tank Assembly
Warning:
Please confirm the connection of frames is tighten and the placement is
stable first and then assembly the water tank.
Please check the water cylinder and make sure there is nothing inside of it. If there is, please try to take it out.
Put the assembled frames on level ground, or install them in their final place of operation, e.g. on the ground or
on a roof
(If on roof, aerial work, please pay attention to safety)
.
Remove the nuts from the screws at the end
of water tank.
Then two workers hold onto the two ends of the tank, and put the tank onto the gantry carefully.
Please try to let the screws go through the long notch on the gantry. You may need to gently turn the cylinder
to achieve it.
Then screw the nuts back onto the screws of the tank so that the tank can be fixed on the frame.
