background image

11

5SERgS-ANUAL

Placing your subwoofer in a corner 

will produce optimum performance. 
Ex per i ment with at least two corners and 
decide which is the best, or you can try 
the following procedure:

1.    Start by placing the subwoofer right 

on the seat of your favorite couch 
or easy chair. Take care to position 
it so it is not likely to fall off. (This 
method may seem a bit odd, but it 
is based on principles of acoustic 
physics.)

2.    If you are using the subwoofer as 

part of a Home Theater system, 
you can either run a calibration 
test (noise) signal through the 
subwoofer, or simply plug the 
analog outputs of a CD player di-
rectly into the subwoofer’s line level 
inputs. Turn down the subwoofer's 
volume level before turning on the 
CD, then play some of your favorite 
music samples with heavy bass.

3.    Walk around the room, listening, 

and crouch down low in all the 
positions where you might be able 
to place the subwoofer. Ideally your 
ears would be where the sub would 
be placed. Explain to the family 
what you are doing, in case they 
think you've 

fl

 ipped. Find the place 

where the subwoofer's bass output 
sounds the loudest.

4.    Shut things down and install the 

subwoofer in this position. Make 
sure the control panel is not touch-
ing anything, and that it can receive 
good ventilation.

Although low frequencies are non-di-

 rec tion al, factors such as room re 

fl

 ec -

tions, standing waves, resonance and ab-
 sorp tion will strongly affect your subwoof-
er’s per for mance. Moving the subwoofer 
from one location to another can have a 
major effect on the bass response.

Location

The Auto EQ mode will let you adjust 

for the room effects, but you should 

fi

 nd 

the best location 

fi

 rst.

Remember to keep the subwoofer 
at least two or three feet away from 
any TV screen, computer, VCR or 
mag net ic tapes and discs. This will 

reduce the chance of the magnetic 

fi

 elds 

upsetting the TV screen or erasing your 
magnetic media.

Using Two Subwoofers

If you wish to use two subwoofers, the 

sound output will double (an increase of 
6 dB). Locate the subwoofers with one 
in each corner and ex per i ment with the 
location and phase control to achieve the 
best bass response.

Always drive each subwoofer through 

the Left/Mon input even though you are 
driving one subwoofer with a right chan-
nel drive and the other with a left channel 
drive. If your pream pli 

fi

  er has a single 

sub/LFE output, use a Y cable to split it 
into two outputs. 

Содержание True Subwoofer EQ Solitaire 10

























Отзывы: