Sunfire True Subwoofer Architectural, Руководство пользователя

Страница: 2 / 20

User's Manual
2
Safety Instructions
1. Read Instructions -– All the safety and
operation instructions should be read
before the Sunfire Component is
operated.
2. Retain Instructions — The safety and
operating instructions should be kept for
future reference.
3. Heed Warnings — All warnings on the
Component and in these operating
instructions should be followed.
4. Follow Instructions — All operating and
other instructions should be followed.
5. Water and Moisture — The Component
should not be used near water - for
example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc.
6. Ventilation — The Component should be
situated so that its location or position
does not interfere with its proper ventila-
tion. For example, the Component should
not be situated on a bed, sofa, rug, or
similar surface that may block any
ventilation openings; or placed in a built-in
installation such as a bookcase or cabinet
that may impede the flow of air through
ventilation openings.
7. Heat — The Component should be
situated away from heat sources such as
radiators, or other devices which produce
heat.
8. Power Sources — The Component
should be connected to a power supply
only of the type described in these
operation instructions or as marked on the
Component.
9. Power Cord Protection — Power-supply
cords should be routed so that they are
not likely to be walked upon or pinched by
items placed upon or against them,
paying particular attention to cords at
plugs, convenience receptacles, and the
point where they exit the Component.
10. Cleaning — The Component should be
cleaned only as recommended in this
manual.
11. Non-use Periods —The power cord of
the Component should be unplugged from
the outlet when unused for a long period
of time.
12. Object and Liquid Entry — Care
should be taken so that objects do not fall
into and liquids are not spilled into the
inside of the Component.
13. Damage Requiring Service — The
Component should be serviced only by
qualified service personnel when:
A . The power-supply cord or the plug has
been damaged; or
B . Objects have fallen, or liquid has spilled
into the Component; or
C. The Component has been exposed to
rain; or
D. The Component does not appear to
operate normally or exhibits a marked
change in performance; or
E. The Component has been dropped, or its
cabinet damaged.
14. Servicing — The user should not
attempt to service the Component beyond
those means described in this operating
manual. All other servicing should be
referred to qualified service personnel.