Sunfire High Resolution Series Скачать руководство пользователя страница 2

User's Manual

Important Safety 
Instructions

1. 

Read Instructions

2. 

Keep these Instructions

3. 

Heed all Warnings.

4. 

Follow all Instructions 

5. 

Do not use this apparatus near water.

6. 

Clean only with dry cloth.

7. 

Do not install near any heat sources such 

as radiators, heat registers, stoves, or other 

apparatus (including amplifiers) that produce 

heat.

8.

 Unplug this apparatus during lightning 

storms or when unused for long periods of 
time.

9.

 Refer all servicing to qualified service 

personnel. Servicing is required when the 
apparatus has been damaged in any way, 
such as a power-supply cord or plug is dam-
aged, liquid has been spilled or objects have 
fallen into the apparatus, the apparatus has 
been exposed to rain or moisture, does not 
operate normally, or has been dropped.

10. 

Ventilation — The apparatus should be 

situated so that its location or position does 
not interfere with its proper ventilation. For 
example, the apparatus should not be situ-
ated on a bed, sofa, rug, or similar surface 
that may block any ventilation openings; 
or placed in a built-in installation such as 
a bookcase, cabinet, or closed equipment 

rack that may impede the flow of air through 

ventilation openings.

11. 

Power Sources — The apparatus should be 

connected to a power supply only of the type 
described in these operation instructions or 
as marked on the apparatus.

12. 

Power Cord Protection — Power-supply 

cords should be routed so that they are not 
likely to be walked upon or pinched by items 
placed upon or against them, paying particu-
lar attention to cords at plugs, convenience 

receptacles, and the point where they exit 
the apparatus.

13. 

Non-use Periods—The power cord of 

the apparatus should be unplugged from 
the outlet when unused for a long period 
of time.

14. 

Object and Liquid Entry — Care should 

be taken so that objects do not fall into 
and liquids are not spilled into the inside of 
the apparatus.

15. 

Servicing — The user should not attempt 

to service the apparatus beyond those 
means described in this operating manual. 
All other servicing should be referred to 

qualified service personnel.

16. 

To Prevent Electric Shock, do not use 

this polarized plug with an extension 
cord, receptacle or other outlet unless the 
blades can be fully inserted to prevent 
blade exposure.   

 

Pour préevenir les chocs électriques ne 

pas utiliser cette fiche polariseé avec un 

prolongateur, un prise de courant ou une 
autre sortie de courant, sauf si les lames 
peuvent être insérées à fond sans laisser 
aucune pariie à découvert.

17. 

Grounding or Polarization — Precau-

tions should be taken so that the ground-
ing or polarization means of the Com-
ponent is not defeated.

This apparatus does not exceed the Class 

A/Class B (whichever is applicable) limits 

for radio noise emissions from digital ap-
paratus as set out in the radio interference 
regulations of the Canadian Department of 
Communications.

ATTENTION — Le présent appareil numéri-

que n'émet pas de bruits radioélectriques 
dépassant las limites applicables aux ap-
pareils numériques de class A/de class B 

(selon le cas) prescrites dans le règlement 

sur le brouillage radioélectrique 
édicté par les ministere des 
communications du Canada.

Содержание High Resolution Series





















Отзывы: