Thermal Setting
Thermal Imaging Integrated Network Camera
User Manual
40
Issue V1.1
（
2022-05-21
）
Parameter
Description
Setting
Font Size
Custom font size. There are
three sizes can be chosen.
[Setting method]
Select a value from the
drop-down list box.
Area Temperature
Type
There are three types of area
temperature.
[Setting method]
Select a value from the
drop-down list box.
[Default value]
Highest Temperature
Measure Mode
Choose the measure mode from
the drop-down list. Different
models may have different
mode, please refer to actual
product.
[Setting method]
Select a value from the
drop-down list box.
[Default value]
General
Display Alarm
Area
N/A
[Setting method]
Enable or disable
[Default value]
Disable
Area Alarm
Interval (1-1800s)
N/A
[Setting method]
Enter a value manually
ranges from 1 to 1800.
[Default value]
10
Area Alarm
Delay(0-10Sec)
When it happens alarm, it will
delay for the setting time. The
default value is 0.
[Setting method]
Enter a value manually
ranges from 1 to 10.
[Default value]
0
Temperature
range
It depends the device, different
devices have different modes,
there are two ranges, such as -
20 ℃
-
150℃
，
-
40 ℃
-
150℃
.
[Setting method]
Select a value from the
drop-down list box.
Prevent Over Heat
Open, if temperature of the
testing area is too high, you can
enable prevent over heat
function, there are two types,
manual and auto.
[Setting method]
Select a value from the
drop-down list box.
Temper
Duration(5-60 S)
Prevent over heat
’
mode is auto,
the control cover will block for
duration time automatically if
over heat.
[Setting method]
Enter a value manually
ranges from 5 to 60.
