- - 6 - -
camera,and then drill a hole. Completely insert the PLASTIC ANCHOR
provided. Then lead the power and video cables pass through the hole.
2. Disassemble the body cover and camera base from dome camera.
3. Fasten the dome camera base on the wall or the ceiling.
4. Adjusting the Camera Direction Camera body moves in three ways: pan,
tilt and rotate. Adjust the direction so that the lens is pointing at the target.
5. Use the lever to adjust the view angle and focus.
6. Connected the network cable.
7. Connected the power cable carefully and tightly (disconnected the power
cable, if power over Ethernet function was option).
