Sunell Security SN-TPC4201VT, Руководство пользователя

Страница: 27 / 59

Thermal Imaging Box Network Camera
User Manual
Thermal Setting
Issue V1.0 (2020-10-28
）
19
Parameter Description Setting
Measure Mode There are two types of measure
modes. [Setting method]
Select a value from the
drop-down list box.
[Default value]
General
Display Alarm
Area N/A [Setting method]
Enable or disable
[Default value]
Disable
Area Alarm
Interval N/A [Setting method]
Enter a value manually
ranges from 1 to 1800.
[Default value]
10
Temperature
range It depends on the device.
Different devices have different
modes, there are two ranges,
such as -20 ℃ -150℃
，
-40 ℃-
150℃, the thermal imaging box
network camera is -40 ℃-
150℃.
[Setting method]
Select a value from the
drop-down list box.
Prevent Over Heat Open, if temperature of the
testing area is too high, you can
enable prevent over heat
function, there are two types,
manual and auto. [Setting method]
Select a value from the
drop-down list box.
Temper
Duration(5-60 S) Prevent over heat’ mode is auto,
the control cover will block for
duration time automatically if
over heat. [Setting method]
Enter a value manually
ranges from 5 to 60.
Control Cover When prevent over heat mode is
manual, the user should choose
the action manually, such as
pick up, lay down. [Setting method]
Select a value from the
drop-down list box.