4. Trouble Shooting
-22-
Q. I cannot change mode
A. Check connection of Ground cable and IR Cable.
Check LED lamp is on, if not check connection of POWER cable.
Q. All I got on the screen is black.
A. .Check second LED lamp of the interface is on, if not, check A/V sources
connected are working well.
(Second lamp indicates AV sources connected works well.) Check
interface connection has been done well.
Q. Displayed image color is not proper (too dark or unsuitable color)
A. Try to select “INITIAL” in OSD menu, if it does not work, inform to
manufacturer.
Q. I cannot watch the rear camera on the screen
A. Set the DIP switch #7 as state “ON”.
Q. Set mode not appear
A. Check DIP Switch.
Q. OEM image is not displayed.
A. Check interface’s LCD In/Out cable connection. If the status keeps on,
inform to manufacturer.
Q. Screen only displays white color.
A. Check LCD out cable is connected well, if this status keeps, inform to
manufacturer.
Q. Show PIP function via handle button, and original screen appear half only.
A. This is not because of faulty interface, please check original monitor split
function settings.
Q. After connect CAN cable, set gear “P”, video doesn’t appear.
A. Go to “FACTORY MODE”and check “UTIL-Rear Select”. Change
“LAMP”settings to “CAN” with remote control.
※
LAMP : In case of connecting “Rear-C” wire of Power Cable to Rear
Lamp in vehicle.
CarNavi-Tech
CarNavi-Tech
