Sune Technology A4L-1106-003, Технические характеристики и установка, Страница: 13 / 24

13
2.6 Parking guide line setting
FACTORY mode – Press
◀
button 2 seconds long on the remote control.
①
Register the value needed on the “PARK ENABLE” as “ON” in the PARK
section as shown left. (default – OFF)
②
If you get rear gear after setup, parking guide line will appear on
screen as shown left. Now that you push “OK” button, you can see “H-POS”
on the left of screen. Then adjust horizontal position of the guide line.
③
After adjusting horizontal position, press “OK” on the remote control.
Then you can see “V-POS” on the left of screen. At that time you can
adjust vertical position of the guide line.
CarNavi-Tech